PVC Edge Banding Machine/Extrusion Line

• Customization: Available
• Certification: CE
• Condition: New
• Model NO.: LP2018081601
• Automatic Grade: Semiautomatic
• Structure: Horizontal
• Transmission Method: Electric
• Transport Package: by Sea
• Specification: 16M (L) X 1M (W) X 3 M (H)
• Trademark: Dippingtech
• Origin: China
• Production Capacity: 20-30m/Min.

Product Description

PVC edge banding extrusion line

1. whole extrusion line technical information

  voltage: 380V/3P/50Hz
  product: PVC edge banding
  material: PVC+CaCO3 
  equipment center height: 1000mm
  operation direction: from right to left

2. equipment configurations
                              
1) SJSZ -51/105 conical twin screw extruder
  screw diameter:                             ¢51/¢105mm
  screw & barrel, nitration layer thickness:          0.4~0.7mm
  screw quantity:                              2 pcs
  barrel heating:                               cast aluminum heater
  heating power:                               4 zones, 26KW
  barrel cooling:                               3 zones, single zone air cooling 180W*3
  material feeding type:                    automatic forced feeding, power 0.55KW
  max. production capacity:              240kg/h
  main motor power:                         18.5KW
  basic structure:                              horizontal installation
  cooling mode:                               external circulation cooling system
  whole gear box is special speed reduction device of long lifespan, low noise and low heat.
  Electrical control section
  frequency converter:                     frequency conversion speed regulator
  contactor:                                      Schneide* contactor

2) bi-extrusion mold
  mold material: 2CR13
  mold parameter: product width 22mm, thickness 2mm (customizable according to
                customer's products)
 
3) 4m water cooling trough
  stainless steel water trough length: 4000mm, width 400mm
  stainless steel material: SUS304
   
4) double-station four-wheel haul-off machine 
  integrated haul-off, embossing, bottom gluing functions
  four plastic coated haul-off wheel: 2 pairs
  control power: 1.5KW*2=3KW
  control type: DELTA frequency conversion control power: 1.5KW*2=3KW   
  worm gear speed reducer: 2 sets    
  haul-off speed: 1.5~20m/min
  embossing device   embossing wheel: 2 pairs
  gluing device   gluing wheel: 2 pairs

5) double-station automatic winder
  torque motor driven: 2 sets
  control torque: 5N.M
  take-up reel quantity: 2 pcs

6) 300L/600L cool hot mixer
  mixing cylinder block total volume: 300L   effective volume: 275L
  stiring paddle: 3 pcs (stainless steel)
  stiring speed: 1390 rpm
  heating mode: self abrasion heating
  mixing time of every cylinder material: approx. 10 min
------------------------------


CONTACT US

Dipping Industries (Shanghai) Co ltd
Website	dipping-industries.en.made-in-china.com
Contacts	Mr.Low & Ms.Rebecca
Address	Rm.746, No.39, Alley1500, Meijiabang Road, Songjiang Shanghai, 201620, China